Hardware and System Specification

Both of these units were chosen not only based on their unique ruggedness and very high and communications capabilities, but also for their state of the art new generation capabilities and features. To ensure the MineLinkMobile software delivers its best performance, SNCTechnologies though a careful selection process and on-site testing chose two difference on-board LCD computer hardware units. 

 

Onboard Hardware

Option 1

TREK-753 MDT LCD (Mobile Data Terminal)

The TREK-753 Mobile Data Terminal from Advantech as the onboard computer and LCD Touch Screen. Advantech, founded in 1983, is the market leader in providing innovative solutions for LCD MDT units, embedded systems, and automation products. Supporting many industries including the Military, there are thousands of Advantech onboard hardware units installed around the world supporting a whole range of mobile applications.

Advantech TREK-753 Onboard Mobile Data Terminal Hardware

SNCTechnologies is very proud to have been appointed the Advantech Indonesian Channel Partner for mining. This has fantastic strategic value for Indonesian mining customers because they will have better and closer support for sales, spare parts and repairs all within Indonesia for a fast responsive turnaround time.

 

 TREK-753 MDT LCD (Mobile Data Terminal) Hardware Specification
Operating System

 Microsoft Windows Embedded Standard Operating System

 LCD Panel

7” WVGA industrial grade TFT LCD with 5 programmable adjustable brightness hot keys 

 CPU And Chipset

Onboard Intel Atom Z510PT 1.1 GHz 

 Memory

2 GB SODIMM RAM

 Expandable Storage

4 GB Industrial Grade Compact Flash card

 I/O Interface

2 x full functional serial RS-232 port support high speed (up to 1Mb max) and 1 x RS-485 port

1 x built-in 2 W speaker, 1 x line in and 1 x line out, 1 x microphone input (*)

1 x Video Input for rear view camera (*)

3 x USB 2.0 ports

1 x 100/1000T Gigabit Ethernet 

1 x light sensor on front cover for auto LCD backlight adjustment

4 x isolated digital input & 2 x isolated digital output ports (*)

CAN Bus SAE J1939 and SAE J1708 protocol (*)

 GPS

Built-in 50 Channel GPS uBlox LEA-5S with SMA connector for external antenna 

 Power Management

Wide Range Voltage input 6 – 36 V with internal load-dump voltage protection, ISO7637-2 & SAE J1113 compliance

 Environtment

Fanless and Ruggedized IP54 casing with aluminum alloy material  able to work under -30 - 60°C Operating Temperature range

Meet an Military Vibration Shock standard MIL-STD-810G: 100G, 6ms 

 Accessories

VESA RAM Mounting w/clamp base and VESA base

 

Option 2

VMC 1100SNC All-In-One Vehicle Computer with Touch Screen and Multifunctional Tracker

VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel® Atom™ processor, is designed for transportation applications requiring real-time vehicle tracking. Adopting the latest low power consumption processor and integrating a WVGA LCD with a brightness of 400nits and a 4-wire resistive touch sensor, VMC 1100 does not compromise with its space to sacrifice its functional features. It provides dual CANbus, RS-232, RS-485, USB 3.0, GPIO, analog input, PWM and LAN signal. For security, VMC 1100 supports real-time vehicle tracking through GPS and SMS/GSM/GPRS. VMC 1100 can also be upgraded to a different LCD resolution and include other features such as LTE, projected capacitive touch, CANbus protocol support and backup battery.

NEXCOM - VMC 1100SNC All-In-One Vehicle Computer with Touch Screen and Multifunctional Tracker
VMC 1100SNC All-In-One Vehicle Computer with Touch Screen and Multifunctional Tracker Hardware Specifications
 General
  • Cooling System: Fanless
  • Enclosure: Plastic PC + ABS with aluminum die casting heatsink
  • Mounting: Support VESA 75, stand mounting
  • Four SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPS
  • Power Input: 9 ~ 36VDC input with Ignition
  • Power Consumption: 26W
  • Ingress Protection: Front panel IP54
  • Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")
  • Weight: TBD
 LCD Panel
  • 7-inch TFT LCD Panel with LED Backlight
  • 800 x 480 pixels (WVGA)
  • Brightness: 400 cd/m² (typical)
  • Contrast ratio: 600:1 (typical)
 Touchscreen Sensor
  • 4-wire resistant touch
  • Anti-glare coating surface
  • Transmission rate: 78 ± 3%
 CPU And Chipset
  • Intel® Atom™ Dual Core E3825 1.33GHz
 Memory
  • One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)

- Default 2GB

 Expandable Storage
  • 1 x SATAIII SATA DOM Slot (available option 16G and 32G)
 Expansion
  • 1 x Half mini-PCIe socket (PCIe + USB) for WLAN option
  • 1 x mini-PCIe socket ((USB + UART) for WWAN option)
  • 1 x External module for OBD/Battery module option(UART + USB)
 I/O Interface-Front
  • F1 ~ F5 functions key
  • Light Sensor
  • Internal Mic-in
  • 2 x Built-in 2W speakers
  • 3 x LED indicators (Power mode, Storage and WWAN status)
 I/O Interface-Lateral
  • Right side

- 1 x Micro SD card socket

- 1 x SIM card socket

- 1 x USB 3.0 host type A connector

- 1 x Mic-in, Line-out

  • Left side

- 1 x Power button

- 1 x System reset button

- Volume up/down or Brightness up/down

 I/O Interface-Rear
  • 1 x 5-pin Circular connector for Power/Ignition input
  • 1 x RJ45 for LAN
  • 1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)
  • 1 x DB9 (Male) for

- RX/TX or RS-485

- 2 x CAN Bus 2.0

  • 1 x DB15 (Female) for

- GPS dead reckoning interface (optional)

- 2 x PWM, 2 x Analog Input, 3 x GPO, 3 x GPI

  • Analog Input requirement for Voltages are measured
  • Channel: 8
  • Voltage range: 0 ~ 38V
  • Resolution: 8 bit
  • Analog Input requirement for Frequency, Speed
  • Square wave
  • Frequency signal offset voltage range: 0 ~ 15VDC
  • Protection: +/- 500V spike
  • Frequency signal duty cycle range: 10% ~ 90% 
Communication Module
  • 1 x On board GPS module
  • 1 x WLAN or Bluetooth module for optional
  • 1 x WWAN module for optional 
Power Management
  • Selectable boot-up & shut-down voltage for low power protection
  • HW design ready for 8-level delay time on/off at user's self configuration
  • Power on/off ignition, software detectable
  • Support S3 and S4 suspend mode; wake on RTC and SMS 
 Operating System
  • Windows 8 Professional, WES8
  • Windows 7, WES7
  • Linux Fedora (kernel V3.2.0) 
 Environment
  • Operating temperatures: Ambient with air -20°C to 60°C
  • Storage temperatures: -30°C to 80°C
  • Relative humidity: 10% to 95% (non-condensing)
  • Vibration (random): 3g @5 ~ 500Hz
  • Vibration

- Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4

- Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24

  • Shock

- Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g

- Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

 Power Design & Protection
  • Load dump and inductive load protection
  • Cold cranking protection
  • Transient voltage protection
  • Electrostatic discharge protection 
 Standards/Certifications
  • EMC

- CE, FCC class B

  • Power

- SAE J1113

- SAE J1455

- ISO 7637-2

  • Safety

- EN 60950-1 LVD 

 

Standard Installation Schematic 

 

The MineLink configuration above is a similar installation for both the TREK-753 and the VCM 1000SNC LCD MDT Options

The standard MineLink onboard vehicle installation uses either a TREK-753 LCD MDT or a VMC 1100SNC unit. It is also equipped with two (2) WiFi antennas, one on the left and one on the right side of the vehicle, a GPS antenna, WiFi Radio, POE and industrial grade Voltage Protection.

All hardware solutions have been tested for vehicle applications in the toughest and harshest environments. Both the wireless radio and the onboard screen are located inside the cab.  The antennas are mounted outside. All exterior cables are shielded with high-grade industrial conduits that meet best practice standards for any heavy equipment installation.

Wireless Radio and antenna hardware specification:

Radio

 Ubiquiti Atheros MIPS

 Adapter

1 x 10/100 Base-TX Ethernet 

 Antenna

2 x RP-SMA Connector for external antenna

 Modulation

802.11b/g/n 2.4 GHz standard, with up to 28dbm TX power

 Radio Gain

Sensitivity -75 - -97 dbm

Antenna Type

2 x Omni NMO Outdoor Antenna with Gain 6 dbi

 Consumable

Mounting brackets, cables and connectors