In the competitive landscape of mining operations, maintaining fleet performance is crucial. The TireProSense Monitoring And Management System offers a sophisticated solution that leverages information technology to enhance overall fleet performance and productivity through effective tire management.

By implementing this system, companies can address various business challenges related to tire performance, including efficient tracking of tire inventory.

TireProSense is a tire pressure monitoring and management system that uses advanced technology. TireProSense provides real time tire performance readings and alerts that are communicated via networks to an onboard display and a central monitoring station from the vehicle and/or trailer tires.

The pressure sensor is easy to install and there is no need to dismount the tire. Simply screw the sensor on the valve stem.

TireProSense Benefits

  • Real-Time Monitoring Alerts
  • Improved Safety and Dynamic Handling – Better Traction
  • Lower Fuel Consumption – Lower Rolling Resistance
  • Increased Availability – Reduce Lost Time Stopping for Pressure Checks
  • Improved Tire Performance – Save Tire Tread by 35%
  • Reduce Blowouts and Zipper Rips
  • Identifies Tire Problems Before Becoming a Problem During Operations
  • Pro-active Maintenance Rather Than Reactive Repairs
  • Monitor Pressure Parked and Moving
  • Reduced Down Time and Lower Maintenance Costs

The TireProSense Features

  • Simple to fit, program and maintain.
  • Fitted to the end of the valve stem or specific SensorSpud© dual headed wheel spuds
  • Weighs 17 grams, usually less than the tire is out of balance
  • Checks the pressure every 7 seconds
  • Has alerts @ 12.5% & 25% under set pressure as well as 24% (adjustable) for over pressure
  • Uses audio visual alerts but can be enabled to provide SMS, email, or other electronic alerts

Control Risk and Reduce Loss

Why is the first low pressure alert 12.5% below the correct cold pressure?

A tire running at 10% below its specified pressure:

  • will wear at a 10% faster rate
  • the rolling resistance increases so fuel consumption rises
  • contact pressure is reduced 10%
  • traction is affected increasing stopping distances

Safety is Compromised!

At 20% under set pressure the tire will wear 25% faster than at the correct pressure, the danger of a tire failure increases exponentially, the risk of a safety related incident increases.

Client Testimonials

How It Works

TireProSense Wheel TPMS Monitor

Common uses

Consumer Vehicles, Light Trucks, Buses, Emergency Equipment, Straight or Box Trucks, Ag Equipment, Dump and Work Trucks, Heavy Duty and Mining Equipment

Description

TireProSense Wheel Monitor allows users to monitor up to 34 wheel positions.

Built in Data Logging capabilities can log up to 45 days of tire stamped pressure and temperature information that can be downloaded to TireProSense’s Pulse free management software, or to an outside software platform. These capabilities allow you to track and recognize tire performance trends and take your tire maintenance program from reactive to proactive. Further, RS232 proficiency allows tethering and communication capabilities to other technology devices.

General Information

TireProSense Wheel Monitor is capable of reading pressures from 10 psi to 250 psi, are RS232 capable, and can display pressures in PSI, BAR or kPa. The Monitor also features two low pressure alert levels (at 12.5% and 25% drops), a user settable upper high pressure alert (adjustable from 10% to 45%) and a high temperature alert to warn drivers when temperatures reach 194°F. TireProSense’s Pulse Wheel Monitor also has self-diagnostic tests, allow simple installation and provide drivers with real time tire performance information whether parked or on the road.

Equipment and Accessories



TireProSense Valve Stem Monitors – The Easy Simple Solution to Tire Management

TireProSense’s comprehensive line of ‘American Made’, Tire Pressure Monitoring And Management Systems provides customers with the tools needed to add savings, safety and efficiencies to travel and fleet operations by providing real-time tire pressure and temperature monitoring. Readings and alerts as well as advanced monitoring options including data logging, drop-and-hook applications, remote monitoring, custom alerts and fully integrated solutions with leading Telematics providers, TireProSense remains the Best in TPMS.

10 WHEEL MONITOR (Part #ALTGPM10)
  • Monitors 1 to 10 wheel positions
  • Dimensions, Weight, Power = 6.5”W x 3.0”H x 0.5”D, 4 ounces, 12VDC
  • Use on Auto, SUV, Heavy Equip,  Ag, Bus, Truck
  • Communicates (real time) via RS232 to a serial port
  • Data Logging capabilities   Antenna and power cord required  – sold separately

UNIVERSAL INTELLIGENT REPEATER (Part #URA16)
  • Monitors up to 16 wheel positions
  • No user interface for Drop & Hook or Programming function
  • Communicates with all trucking networks including J1587, J1939, CAN
  • Transfers data over trailer network to Tractor J1939 or J1708 network
  • Deutsch power cord & 7” Antenna Required – sold separately

INTELLIGENT “DROP & HOOK” MONITOR (Part #ITMA16)
  • Monitors 1 to 64 wheel positions (16 on Tractor, 16 per trailer, up to 3 trailers)
  • Dimensions, Weight, Power = 6.5”W x 3.0”H x 0.5”D, 4 ounces, 12/24VDC
  • For use with – Tractor/Trailer(s) for “Drop & Hook” applications
  • Communicates with J1587 Intelligent Repeaters over the J2497/ABS Network
  • Transfers data from J2497 network to Tractor J1708 network
  • Antenna and power cord required  – sold separately

J1939 INTELLIGENT GATEWAY (Part #GWA16)
  • Monitors up to 16 tires each on tractor/9 trailers/dollies – (160 tires total)
  • No user interface for Drop & Hook or Programming function
  • Communicates with Universal Repeater over all truck networks
  • Transfers data from trailer network to Tractor J1939 network
  • Deutsch power cord & Cabled Antenna Kit required – sold separately

16 WHEEL MONITOR (Part #RVGPM16)
  • Monitors 1 to 16 wheel positions (capable of reading primary and tow vehicle)
  • Dimensions and Weight = 6.5”W x 3.0”H x 0.5”D, 4 ounces, 12VDC
  • Use with RV, Bus, 5th Wheel, all Trailers (boat, motorcycle, snowmobile)
  • Communicates (real time) via RS232 to a serial port  for fleet applications
  • Data Logging capabilities
  • Antenna and power cord required  – sold separately

34 WHEEL MONITOR (Part #HDGPM34)
  • Monitors 1 to 34 wheel positions – (capable of reading primary and tow vehicle)
  • Dimensions and Weight = 6.5”W x 3.0”H x 0.5”D, 4 ounces, 12VDC
  • Use with – Truck, Tractor/Trailer, Off Road (Mining), 5th Wheel
  • Communicates (real time) via RS232 to a serial port for fleet applications
  • Data Logging capabilities
  • Antenna and power cord required  – sold separately

INTELLIGENT BRIDGE (Part #BRIDGE16)
  • Monitors up to 16 tires each on tractor/3 trailers/dollies; 64 tires total
  • No user interface for Drop & Hook or Programming function
  • Communicates with J1587 Intelligent Repeaters over the J2497 Network
  • Transfers data from J2497 network to Tractor J1708 network
  • Molex Power Cord & Cabled Antenna Kit required – sold separately

INTELLIGENT PROGRAMMING MONITOR (Part #IPM)
  • Programming (display only) Monitor – cannot receive transmissions directly
  • Dimensions, Weight, Power = 6.5”W x 3.0”H x 0.5”D, 4 ounces, 12/24VDC
  • Used only for programming Intelligent product or as a pass through display when used in conjunction with J1939 Gateway
  • Antenna and power cord required  – sold separately
Specifications and Information
  • Operating frequency = 433.92 MHz FM
  • Temperature range:  -40°C to +150C (-40°F to +302°F)
  • Sensor batteries are internal, non-rechargeable/not replaceable
  • Sensor pressure range = 8 to 299 psi (55 to 1999 kPa, 1 to 20.3 BAR)
  • Accuracy =  +/- 3% range up to 120 psi, +/- 5% 120 psi and higher

INDUSTRIAL SENSOR (Part #APS1-IND)
  • For use with large bore (industrial) valve stems
  • Weight – .7 oz (19 grams) / Dimensions: 1.11” D x 1.02” H
  • Effective signal range – line of sight – 300 ft. – 433.92 MHz
  • Robust electronics for industrial applications

SENSOR (Part # APS1)
  • For use on standard valve stems
  • Weight – .6 oz (17 grams) and Dimensions: 1.11” D x 1.01” H
  • Effective signal range – line of sight – 300 ft. – 433.92 MHz
FIXED END POWER CORD (Part #AAPC1)
  • Connects Monitor to 12-volt power outlet (accessory outlet in vehicle)
  • 8 ft cord

STRIPPED END/HARD WIRE POWER CORD (Part #AAPC3)
  • Hard wire to a 12-volt power source to power Monitor
  • 8 ft cord

24/12 VOLT FIXED END POWER CORD (Part #AAPC5)
  • Converts power from 24V (vehicle) to 12V (TireProSense Monitor)
  • 8 ft cord

AC/DC WALL PLUG-IN KIT (Part #AAPACDC)
  • Allows conversion of 110V AC to 12V DC on TireProSense monitor
  • Kit includes 8 ft power cord and AC/DC converter
  • Power cord powers Monitors and Echo Repeater

RS232 FIXED END POWER/DATA CORD (Part #ACPC7)
  • Connects to 12V power source
  • RS232 data cord required for downloading data from Monitor
  • Utilizes DB9 connector for downloading to a computer serial port

24/12 RS232 FIXED END POWER/DATA CORD (Part #AAPC9)
  • Connects to 24V or 12V power source
  • RS232 data cord required for downloading data from Monitor
  • Utilizes DB9 connector for downloading to a computer serial port

MOLEX POWER CORD (Part #AAPC11)
  • Use with Intelligent Repeaters and BRIDGES
  • Jacketed, 5-wire, 10 foot power/data cord
  • Molex connector on one end / stripped end for connection to vehicle network
  • Supports Open Collector function. Wired for J2497 and J1708 networks

MOLEX T-BREAKOUT CORD (Part #AAPC14)
  • Use with Intelligent Repeater on trailers/dollies
  • Jacketed, 2-wire, 8-foot power/data cord
  • Molex connector on one end/T-Breakout on other for easy link to vehicle network
  • T-Breakout attaches between the male/shroud of the Weather Pack connector of the standard ABS harness (no splicing necessary)

DEUTSCH END T-BREAKOUT CORD (Part #AAPC21)
  • Use with Universal Repeater on trailers/dollies
  • Jacketed, 3-wire, 8 foot power/data cord
  • Deutsch connector on one end/T-Breakout on other for easy link to vehicle network
  • T-Breakout attaches between the male/shroud of the Weather Pack connector of  the standard ABS harness (no splicing necessary)

DEUTSCH END BLUNT CUT POWER CORD (Part #AAPC24)
  • Use with Universal Repeater, Gateway, and Bridge
  • Jacketed, 8-wire, 3 foot power/data cord
  • Deutsch connector on one end / stripped end for connection to vehicle network

DEUTSCH END 9 PIN T-BREAKOUT CORD (Part #AAPC25)
  • Use with Gateway
  • Jacketed, 8-wire, 3 foot, power/data cord
  • Deutsch connector on one end/T-Breakout on other for easy link to vehicle network
  • 9 Pin T-Breakout attaches to Deutsch 9-pin diagnostic port

CABLED ANTENNA KIT (Part #ABPCA-Kit)
  • Use with all Monitors – SMA end to Monitor, TNC end to antenna
  • Includes: 35 ft coax cable, SMA & TNC connectors, straight wire whip antenna and mounting bracket for securing cable (includes two 1.25” self tapping screws)
  • Bracket also sold separately as replacement part  (Part #CAB, MSRP $5)

ECHO REPEATER (Part #ABPER)
  • Telescoping dipole antennae included
  • Velcro strips for mounting in vehicle included
  • For use as a signal booster on mid-to large vehicles
  • 12V Plug-in Power Cord or 110 Wall plug-in sold separately

STRAIGHT WIRE WHIP ANTENNA – 7 INCH (Part #AAP08)
  • Use on Intelligent Repeater
  • Sold separately as replacement part for Cabled Antenna Kit

MONOPOLE ANTENNA – 3.5 INCH (Part #ABPPMA)
  • Use on SMA connector on Monitor (required if not using cabled antenna kit)

TNC ANTENNA ADAPTER (Part #AAP15)
  • Antenna adapter for 3.5” SMA antenna when using with TNC connection on Repeater or if connecting to end of 35’ coax cable.

SENSOR LOCK KIT (Part #LNK)
  • Includes 1 wrench and 10 nuts
  • Additional nuts available at .50 cents per nut

VISOR CLIP/SUCTION CUPS (Part #AAPVC)
  • Fits on Monitor – clips onto visor or suctions to window
  • 2 clips per set

RAM MOUNT – (for mounting Monitor) (Part #AAP11)
  • Ram Mount with 2.5” arm and 2 knuckle end plates – allows mounting in vehicle
  • Total length and weight: 4” and 6.6 oz

RAM MOUNT MOUNTING PAD (Part #AAP13)
  • 2.43” Diameter double stick mounting pad, sticks to all non-porous surfaces

COMBO RAM MOUNT (with) SUCTION CUP (Part #AAP14)
  • Ram Mount and Suction Cup Combination
  • Comes with suction cup at one end and regular round mount on the other end

RAM MOUNT SUCTION CUP ATTACHMENT (Part #AAP12)
  • Suction cup attaches to windows, metal dashes and non-porous surfaces
  • Power suction lever for secure fastening – Length:3.25” / Weight: 3.6 oz

VISOR CLIP DASH MOUNT (Part #AAP16)
  • ‘Hybrid’ version of the Visor Clip Kit for an additional mounting option
  • Visor Clip ‘legs’ attach directly to back of Monitor
  • Mount can be screwed directly to mounting surface

SENSOR INSTALLATION TOOL (Part #AAP18)
  • Plastic tool to install Sensors on the inside dual valve stem
  • 12” handle easily reaches those hard to reach inside dual valve stems.
  • Sensor seats firmly in end of tool but releases when sensor is snugly on stem

SENSOR SEAL/INSTALLATION TOOL KIT (Part #AAP21)
  • Included – ten (10) Sensor seals and one (1) seal installation tool
  • Allows secure installation of seal replacements into Sensor

T-VALVE – SUPER LARGE BORE STEM (Part #AAP24)
  • For utilization on super large bore valve stems, allows air filling while Sensor is installed
  • One side super large bore and large bore on other
  • Main valve installs directly into rim or onto an existing super large bore stem

T-VALVE – LARGE BORE STEM (Part #AAP22)
  • For utilization on large bore valve stems, allows air filling while Sensor is installed

T-VALVE STEM (Part #AAP20)
  • For utilization on regular valve stems, allows air filling while Sensor is installed

HOOK & LOOP PADS (for mounting Monitor and Echo Repeater) (Part #AAP3)
  • Two velcro strips included with purchase of Monitors and Echo Repeater